Comments for Titan Reloading

Comment on LEE ULTIMATE TURRET PRESS KIT 223 REM by cvn75ht

cvn75ht — Fri, 02 May 2025 22:30:32 +0000

This is my first press that is not a single station press. Now that I have it, I can’t believe I waited so long to get it! I may be a little biased though. I’m definitely a fan of the Lee Precision equipment.

Not only do I love the press and all the goodies that came with it, but Titan Reloading shipped it fast. Titan is THE place when you want reloading equipment at a decent price.

Comment on LEE PR2118 CASE FEED SPRING by John Deckers

John Deckers — Mon, 14 Apr 2025 18:40:17 +0000

Original spring lasted a hundred rounds before it turned into a “Slinky” Replacement spring is going on round 500 without a hitch.

Comment on LEE SIX PACK PRO KIT 38 SPECIAL by Olivier Kubs

Olivier Kubs — Sun, 02 Mar 2025 01:07:33 +0000

This is a fantastic press. Bought it for my 38 and not only is this accurate but so easy to use and set up. I run a spherical powder and it meters accurately every time. If you are on a Pro1000 this is an awesome set up. Will be getting another one in the near future.

Comment on LEE SIX PACK PRO KIT 9mm LUGER by wcr1nova

wcr1nova — Sun, 24 Nov 2024 04:35:40 +0000

This is a great progressive press with a few bad design flaws. If you set it up the way Lee says to and you are using spherical powder, it will leak out before priming the cases, and the last 2-3 primers do feed into the feed paw. To eliminate the issue I primed all cases before running through the machine. I bought this with the intentions of loading 9mm and 223. For 223 you will need a universal expander to slightly expand the mouth to keep bullets sitting in the mouth without falling out or being pressed a little offside. Other than those issues this is a great progressive press, and allows me to load lots of rounds in little time.

Comment on LEE DC MOLD C309-200-R by carlos violante

carlos violante — Sat, 09 Nov 2024 11:37:27 +0000

compre 3 moldes y todos ellos me dan medidas diferentes, usando el mismo material 306. 308, 310

Comment on LEE ULTIMATE TURRET PRESS (5 STATION) by Lyonell Keplar Jr

Lyonell Keplar Jr — Thu, 02 May 2024 18:38:43 +0000

I have always stayed with turret presses because of the control I have over the reloading process. Having tried multiple progressive presses I found them to be lacking in that control. Now we have a Turret Press that meerges speed with control and it is as perfect as it gets. The press itself is rugged, the turret massive. The turret is locked in at each station, eliminating alignment concerns. The use of the Breech Lock system negates the need for multiple tool heads and the fact that the same press can handle 5 station (which comes with the press), four station and six station turrets is a bonus (FYI the six station turret can be set to 3 stations). Using the optional Lee Inline Bullet Feed makes it even faster and easier.

Comment on CUSTOM OVER-RUN .431 BL BULLET SIZER AND PUNCH by Darin Mislow

Darin Mislow — Sat, 23 Mar 2024 14:54:19 +0000

I had a few hundred .44 mag cast bullets from Montana Bullet Works, that were just 1-thousandth to large for my revolver cylinder throats. This sizing die (.431) was perfect and now my gun shoots this bullet very accurately. Very happy with the service!!

Comment on LEE SIX PACK PRO by MARK TOLLIVER

MARK TOLLIVER — Fri, 03 Mar 2023 21:47:24 +0000

I have been reloadingvsince 1987. I started out with a Lee single stage press then I moved to a Lee 1000. I next moved to the Lee Loadmaster. I had always felt that the priming system was the Achilles heels of the Lee AP presses. When primer prices went from 3 cpp to 10 cpp I took notice. I bought a new Lee single stage press and did all case prep including priming on the single stage press. At a dime a shot I couldn’t afford to waste primers. When the 6 Pack came out I was excited so I got one ASAP.
WELL LEE HAS FINALLY DONE IT 100% RIGHT. Well OK 98%. What I like you can seat primers on the shell carriers downward stop position. This means you can feel the primer seating. There is an engraved line on the pin that rises through the case plate carrier. Once this line is slightly over the surface of the case carrier plate you have fully seated your primer. Six stations Hell Yeah!! Means I can add a powder COP, Auto bullet feeder and factory crimp in one press BOUT TIME!
What aint 100% yet, don’t cycle the press with no cases and a full primer tray. Invariably a primer is going to get dislodged in the case carrier plate. Don’t run a case with no primer through the AP unless you have a full primer tray. The primer seating pin will get stuck in the shells empty primer pocket. Make full complete strokes only or trouble will find you.
Overall I LOVE IT, AN AFFORDABLE VERY CAPABLE AP PRESS!!

Comment on LEE SIX PACK PRO by Brock Serre

Brock Serre — Thu, 24 Nov 2022 18:21:43 +0000

I have been reloading for over 15 years utilizing every type of progressive press. For the price and craftsmanship, you cannot beat the six pack. I’ve loaded over 2000 rounds and only had one primer issue. Hats off to Lee engineers they got it right this time. I would recommend this product to anyone that wants to start reloading progressively without spending thousands of dollars.

Comment on LEE DC MOLD C452-300-RF by mrichter

mrichter — Sat, 16 Jul 2022 22:55:33 +0000

Great bullet for heavy 45 colt and 450 bushmaster