Lee 6 Cavity Bullet Mold C358-200-RF produces a .358 diameter 200 grain Round with a flat nose bullet suitable for cartridges like .35 Rem.

Made for heavy duty volume production. The mold and blocks are  machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. A handle attached to the sprue plate is included.

NOTE: Handles to open and close this mold sold separately.  item 90005

The post LEE 6 CAV MOLD C358-200-RF appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold C358-200-RF produces a .358 diameter 200 grain Round with Flat nose bullet suitable for cartridges like .357 Magnum/.38 Special. 

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD C358-200-RF appeared first on Titan Reloading.

Lee 6 Cavity Bullet block 358-158-RF produces a .358 diameter 158 grain Round with a flat nose bullet suitable for cartridges like 38 Special, 38 Smith & Wesson, 38 Colt New Police, 357 Magnum.

Made for heavy duty volume production. The mold and blocks are  machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. A handle attached to the sprue plate is included.

NOTE: Handles to open and close this mold sold separately.  item 90005

The post LEE 6 CAV MOLD 358-158-RF appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold 358-125-RF produces a .358 diameter 125 grain round nose bullet suitable for cartridges like 38 Special, 38 Smith & Wesson, 38 Colt New Police.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 358-125-RF appeared first on Titan Reloading.

Lee Double Cavity Mold TL358-158-2R produces a .358 diameter 158 grain round nose bullet suitable for cartridges like 38 Special, 38 Smith & Wesson, 38 Colt New Police, 357 Magnum.  Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD TL358-158-2R appeared first on Titan Reloading.

Lee 6 cavity bullet block produces 358-148 WC a .358 diameter 148 grain Wad Cutter nose bullet suitable for cartridges like 38 Special, 38 Smith & Wesson, 38 Colt New Police.  Made for heavy duty volume production. The mold and blocks are  machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. The handle attached to the sprue plate is included.

NOTE: Handles to open and close this mold sold separately.  item 90005

The post LEE 6 CAV MOLD 358-148 WC appeared first on Titan Reloading.

Lee 6 Cavity Bullet block  358-150-1R produces a .358 diameter 150 grain Round nose bullet suitable for cartridges like 38 Special, 38 S&W, 38 Colt NP.

Made for heavy duty volume production. The mold and blocks are  machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. The handle attached to the sprue plate is included.

NOTE: Handles to open and close this mold sold separately.  item 90005

Customer’s Report: Excellent Accuracy!

The post LEE 6 CAV MOLD 358-150-1R appeared first on Titan Reloading.

Lee 6 cavity bullet block C358-158 SWC produces a .358 diameter 158 grain Semi Wad Cutter nose bullet suitable for cartridges like 38 Special, .357 Magnum, etc.

Made for heavy duty volume production. The mold and blocks are  machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. The handle attached to the sprue plate is included.

NOTE: Handles to open and close this mold sold separately.  item 90005

The post LEE 6 CAV MOLD C358-158 SWC appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold 358-150-1R  produces a .358 diameter 150 grain Semi Wad round nose bullet suitable for cartridges like 38 Special, 38 Smith & Wesson, 38 Colt New Police.  Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

Customer’s Report: Excellent Accuracy!

The post LEE DC MOLD 358-150-1R appeared first on Titan Reloading.

Lee 6 cavity bullet block TL358-158-2R produces a .358 diameter 158 grain Semi Wad Cutter nose bullet suitable for cartridges like 38 Special, 38 Smith & Wesson, 38 Colt New Police, 357 Magnum.

Made for heavy duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. No finer mold can be purchased at any price.

Micro Bands for Tumble Lubing with Lee Liquid Alox.

NOTE: Handles to open and close this mold sold separately.  item 90005

The post LEE 6 CAV MOLD TL358-158-2R appeared first on Titan Reloading.