Have a Question?

Categories
< All Topics
Print

.44 Magnum with .44 Special Dies

.44 Magnum with .44 Special Dies

To load .44 Magnum cartridges with .44 Special dies, the Sizing Die (1st die) setting stays the same as the .44 Special. The Powder Through Expanding Die (2nd die) and the Bullet Seating Die (3rd die) must be backed out approximately 2 turns. This is the difference in case length from the .44 Special to the .44 Magnum. This setting must be tweeked in as 2 turn is approximate.

Previous .38-55 Winchester
Next .450 Marlin with 45-70 Govt Dies
Table of Contents