Have a Question?

Categories
< All Topics
Print

Case Slider Travel Adjustment

Case Slider Travel Adjustment

If your case slider does not travel far enough to reach the shell plate give this a try. Put the Z bar in the front (side) hole of the case slider. Starting with the press lever in the full up position cycle the press lever one time so the lever ends up in the full up position. Loosen the turrte ring bolt above the top end of the Z bar 1/2 to 3/4 turn. Push the case slider against the shell plate and re-tighten the bolt.

Next Pro 1000 Broken Carrier
Table of Contents