Have a Question?

Categories
< All Topics
Print

Load Master Index Flipper Threads

Threading of the Index Flipper

The Load Master Index Flippers are molded without the threads in them because the index rod is designed to self tap so the flipper does not move around once on. You'll notice the threaded end of the square rod is not threaded for the first 1/8". This is to act as a guide to get the thread started straight. To thread the flipper on you must apply a slight forward pressure (toward the rod) as you turn it on. The threads will start and thread the rest of the way. This insures a tight fit.

Previous Load Master Caliber Switch
Next Load Master Priming Problems
Table of Contents