Have a Question?

Categories
< All Topics
Print

Tight Case Length Gauge

Tight Case Length Gauge

The case length gauge just needs to be polished down a little in diameter, so the gauge slides into the case.  If you return the gauge to the factory with a sample case (one that gave the trouble) We can polish the mandrel down at no charge.  One can also do this at home if you chuck the mandrel in a drill press so you have both hands free.  While the drill is spinning, lightly file or sand the mandrel until a case slides over.  Using emery cloth works very well.

Lee's address is:

Lee Precision, Inc.
4275 Highway "U"
Hartford, WI 53027

Previous Shell Holder and Calibers
Next Tight Cutter Thread on Case Length Gauge
Table of Contents