Have a Question?

Categories
< All Topics
Print

Lyman and RCBS Bullet Sizers

Using Other Bullet Sizers

We do not have a conversion chart showing nose punches for Lee molds. You can order a punch for a similar shaped bullet and usually it works quite well. If a mark is left on the bullet it is cosmetic only and does not effect the accuracy. Should you desire a perfect fit, it is quite easy to modify the nose punch with five minute epoxy. Put a few drops of epoxy into the nose punch and press a bullet into place. Be sure to clean the nose punch so the epoxy will stick, and oil the bullet so it wont stick.

Previous Liquid Alox With Non Tumble Lube Bullets
Next Melter Top Rim Replacement
Table of Contents