Have a Question?

< All Topics

Stuck Cases

Stuck Cases

Lee will remove a stuck case for $4; Return the die to the factory with an explanation.

Lee’s address is:

Lee Precision Inc,
4275 Hwy. U,
Hartford, WI 53027.

You can easily remove the case yourself, loosen but do not remove the decapper clamp with a 3/4 and 1/2 wrench. Then pound on the end of the decapper rod with a 3/16 drift punch, and use a heavy hammer for best results. You can leave the die in the press for this operation.

Previous Speer Warning on Factory Crimp Die
Next Target Model
Table of Contents