Have a Question?

Categories
< All Topics
Print

March 2011

                                   MARCH 2011 NEWSLETTER

WOW! It's been three weeks since the Superbowl already. I mean no offense to anyone but, OOHRAH!!! G.B. PACKERS!!! With winter on the down side thoughts turn to spring and all that comes with it. It's too early to pull the covers off the Harleys but I did peek the other day and Yup, they're still there. Robin and I find this March very special. Our son's enlistment in the US Marine Crops is done and he's coming home for good. We're very releaved and PROUD! We are truely enjoying all the friends we have made through Titan Reloading and look forward to many more. Feel free to contact us. Service and Support is our top priority. I have a day job so the best time to call for support is between 6-10 PM CST. I am able to answer emails throughout the day. Robin can take your service calls daily and will pass any support questions she can't answer on to me. As always, you will find many answers to questions in the "FAQ" and "Help Videos" areas of our website www.titanreloading.com

Dennis / Titan Reloading

NEW IN 2011:

Lee 18 Cavity 00 Buckshot Bullet Mold

New eighteen cavity 00 Buckshot mold. Precision-machined mold produces 18 linked pellets per cast. No need to individually count pellets simply snip three strands into your 12 gauge shell. Each cast produces enough pellets to load two 12 Gauge shotshells.

Handles shown, not included. Use handles 90005 in the "Mold and Melter Accessories" category.

Ball diameter .330

INSIGHT OF THE MONTH:

Lee Die Set Explanations

Pacesetter die set

Includes a full length sizing die, bullet seating die, factory crimp die, shell holder, powder dipper and load data.
This set is recommended for assembling ammunition for hunting purposes as the finished rounds chamber easily and can withstand rough handling of the firearm action.

Limited Production Pacesetter die set


This set consists of a two die set which includes a full length steel sizing die(requires case lubrication), bullet seating die, shell holder, powder dipper and load data.

Collet die set


Includes the Collet neck sizing die, dead length bullet seating die, shell holder, powder dipper and load data.
This set is designed for assembling the most accurate ammunition but is not recommended for hunting rounds as the case is neck sized only and the bullet is not crimped in the case.

Deluxe die set


Includes both the full length(requires case lubrication) and Collet neck sizing dies, dead length bullet seating die, shell holder, powder dipper and load data.
This is essentially a Collet die set with the addition of the steel full length sizing die so that one can prepare newly acquired cases for the first firing in the rifle.

RGB (Really Great Buy)


Comes as a standard two die rifle set that contains a full length sizing die and a crimper / seater die. This set is designed to meet a tight budget and contains only the dies.

Carbide die set


Carbide handgun dies contain the carbide sizer, the powder through expanding die, the seater/crimping die, a powder dipper, shell holder and load data. The seater/crimper die applies a modified taper crimp and eventually a roll crimp negating the need for a separate taper crimp die.

Lee Deluxe Pistol Die Set


Includes our popular three die carbide handgun die set explained above plus the addition of our Lee Carbide Factory Crimp Die. This additional die has a carbide ring that post sizes your case ensuring that your loaded cartridge will fit into the chamber of your gun. Additionally, the degree of crimp is determined by the finger adjustable crimp knob on top of the die. This die is meant to work in conjuction with your bullet seating die as it has no provision for seating the bullet itself.

Loggin to your Titan Reloading Account if you wish to subscribe to this newsletter. We will be sending to subscribed accounts only starting in May 2011. Thank You.

 

Previous April 2011
Next January 2011
Table of Contents