DILLON SQUARE DEAL B .357 MAGNUM

$629.00

Out of stock

Receive an email notification when this product becomes available

SKU: DP20103 Category: Brand: Dillon

Description

DILLON SQUARE DEAL B .357 MAGNUM

How it Works

Reloading with Dillon’s Square Deal B is Easy as 1-2-3!

Most shooters realize that reloading is the most economical way to enjoy their sport, but many shooters are unaware of just how simple it is to reload. In fact Dillon’s Square Deal B is one of the easiest progressive loaders in the world to learn to operate. How can we make that statement? Simple. Since all of the reloading steps are performed with a stroke of the handle, there is less to remember (or forget) than with an old-fashioned single-station press. Skeptical? Just watch this short video to see how easy it really is.

No Adjustments

Of all the steps in reloading, the adjustment of the reloading dies is the most critical. With the Dillon Square Deal B’s removable toolhead, your dies will stay in perfect adjustment. There’s no need to screw them in and out even when changing calibers! The Square Deal B toolhead is held on by four allen screws. There’s less to go wrong, less to remember.

Handgun Ammunition

The Dillon Square Deal B will produce match-quality ammo for 18 pistol calibers. The Square Deal B comes complete with one caliber conversion installed on the machine.

The Basic machine includes the following:

1 Square Deal B reloading machine
1 powder measure with large and small powder bars (small installed). The small bar throws from 2.1 to 15 grains of powder. The large bar throws from 15 to 60 grains of powder
1 priming system with large and small priming parts
1 early warning buzzer and rod for primer system
1 packet of primer tubes containing: 1 large primer pickup tube, 1 small primer pickup tube, and 1 magazine tube
1 primer slide assembly
1 powder measure fail safe rod assembly with bracket (13355)
3 locator buttons
1 toolhead
1 powder die
1 caliber conversion kit
1 set of carbide dies (except for 44/40, which uses steel dies)
1 spent primer cup with bracket and screws.
1 loaded cartridge chute with screws and a plastic bin
1 written instruction manual

Note: The Strong Mount shown in the picture is NOT INCLUDED and must be purchased separately.

To change calibers you will need an SDB Caliber Conversion Kit which contains the shellplate, dies, powder funnel, bullet seating stem(s) and locator buttons for one caliber.

Additional information

Weight 18.75 lbs
Dimensions 24.5 × 12.5 × 6 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.