Your Silver Bullet in Reloading Equipment and Supplies!

Save 60-80% off the cost of Factory Ammunition with Titan Reloading

DILLON XL750 PRESS ONLY

  • DILLON XL750 PRESS ONLY

DILLON XL750 PRESS ONLY

  • Brand: Dillon
  • Product Code: DP75076
  • Availability: Out Of Stock
  • $593.00


This product has a maximum quantity of 1

DILLON XL750
PRESS ONLY

The XL750 is shown with the following optional accessories:
Electric Casefeeder
Roller Handle
Strong Mount
Bullet Tray
Powdercheck Die
Low Powder Sensor
Die
Conversion kit
These items are sold separately
The Dillon XL750 is a high-speed progressive reloading machine designed to load the common rifle and handgun cartridges, from 17 Hornet though the common belted magnum cartridges in rifle, and 32 ACP through 500 S&W in handgun. Machine height from the bench is 32" without the optional electric case feeder, 38 1/2" with the electric casefeeder installed.

The Basics

The basic XL 750 includes the following:
  • 1 powder measure with standard large and small powder bars (small bar installed). The small bar throws from 2.1 to 15 grains of powder. The large bar throws from 15 to 55 grains of extruded powder or up to 60 grains of ball/spherical type powder.
  • 1 primer system with large and small priming parts (appropriate size installed).
  • 1 large and one small primer pick-up tube.
  • Low Primer Alarm
  • 1 loaded cartridge bin
  • 1 toolhead
  • 1 powder die
  • 1 set of standard Allen wrenches
A caliber specific Die Set and Conversion Kit are required to reload with this press.

*Die set and Conversion Kit NOT INCLUDED.

CLICK HERE for Dillon XL750 conversion kits.

To change calibers, you will need:

  • A Die set for the new caliber.
  • A Caliber Conversion Kit.
  • If you have the optional electric casefeeder you may need a different casefeed plate. Please refer to the caliber conversion chart in the Instruction Manual.
  • If you are using the Mr. Bulletfeeder you made need a caliber conversion.
If you want to leave your dies preset, you'll need:
  • Toolhead(#13863)
  • Powder die(#20064)
  • OR The 750 Quick Change(#22059), which includes a powder measure, powder die, toolhead and a toolhead stand. This allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes.

Write a review

Please login or register to review