Your Silver Bullet in Reloading Equipment and Supplies!

Save 60-80% off the cost of Factory Ammunition with Titan Reloading

MEC 9000GN 20GA.

  • MEC 9000GN 20GA.

MEC 9000GN 20GA.

  • $709.21
  • $672.75

MEC 9000GN

High-speed, high-volume reloading at its best.

  • The 9000GN has all the innovative features found on the 8567N Grabber, plus automatic indexing and finished-shell ejection for quicker and easier reloading.
  • The revolutionary Auto-Dex™ automatically moves the shells through each reloading stage by simply returning the handle to the top of its stroke. Accurately resized shells are achieved with each stroke.
  • Finished shells are automatically ejected from the shell carrier after final crimping. This time-saving feature makes one-more-hand operation obsolete.

Finished shells with every stroke

The fastest, smoothest indexing system ever made. The factory-set speed provides uniform movement through every reloading stage regardless of operator action.


  • 7/8 oz. Charge Bar
  • Bushings #20, #22 and #24



  • Press Type: Progressive
  • Gauge: 20 Gauge
  • Shell Length:  2 3/4" factory setting
  • Frame:  Steel
  • Priming:  E-Z Prime automatic primer feed
  • Loading Rate: approximately 300-400 shells per hour
  • Gauge Conversions:  No, die sets NOT available.



  • Three Crimping Stations-first starts the crimp, the second closes the crimp and the third places a taper on the shell.
  • "Auto-Dex" Automatic Indexing with finished shell ejection.
  • "Auto-Cycle" Charging.
  • "Power Ring" Resizer gives consistent, accurately sized shells for optimum gun performance.
  • Removal of loaded shell causes carrier to index.
  • Kits available to make steel shot compatible (not included).
  • Performs ten operations at six stations at once; with every stroke a reloaded shell is completed.

NOTE: To convert to 3" shell reloading (12 and 20 gauge only) kit No.8582 is nessessary

NOTE: This reloader will reload steel shot shells. If your reloader has not been converted to reload 3" shells, Kit #8581-12 is necessary. However, if your reloader is equipped to reload 3" shells, you need the single stage steel shot adapter Kit #8433.

NOTE: A special steel shot charge bar must be used when loading steel shot. Do not use charge bars designed for lead shot when loading steel shot shells.

Write a review

Please login or register to review